Site Information


 Loading... Please wait...
  • Metallic epoxy floor
  • Epoxydoc Metallic Floor Finish



Product Description

METALLIC EPOXY.  Metallic powders when used with 100% solids epoxy (clear) will create dazzling effects.  Simply add 2 metallic color paks to 1 1/2 gallons (A and B) clear epoxy and mix.  You can roll or squeegee the epoxy onto the floor, wait a few minutes and backroll, then watch as the metallics settle into a beautiful pattern.  Purchase Epoxydoc 1 1/2 gallon kits and metallic powders.   


  • 2 metallic color paks per  1 1/2 gallon mixed epoxy
  • 1 1/2 gallon of epoxy mix will do 20 mils @ 120 sq.ft. per 1 1/2 gallon. 

Example: If you have a 250 Sq.ft. area you will need

  1. 3 gallon kit of epoxydoc 101
  2. 6 color paks metallic powder

TO MIX:  Use a clean 3 gallon bucket.  Add part A clear Epoxydoc DOC101 epoxy (1 gallon) to a clean bucket.  Mix metallics slowly a little at a time.  Mix until complete.  When ready to use mix part B, 1/2 gallon for 3 minutes.   Pot life is 30 minutes.


Product Reviews

Write Review

  1. Beautiful

    Posted by Mike Davis on 22nd Nov 2017

    This was easier than I expected

Find Similar Products by Category